Kinetic regularities of epoxy resins modification by aliphatic and aromatic dibasic acids have been studied. The effective rate constants and activation energies of the reactions between epoxy resin and acids by different nature have been calculated.

Metal-enhanced bioluminescence is a complex photophysical event which manifests itself in manifold luminescence enhancement and depends on many parameters. The parameters include the distance between the luminescent source and the nanomaterial surface.

Discusses the amorphous materials in terms of absorption of electromagnetic infrared radiation as the integral characteristic of a photoelectric converter. The spectrum obtained experimentally was shown with the consideration of the main absorption peak.

Synthesis of a polymer by the reaction between maleic acid and 2-methylquinoxaline 1,4-dioxide. Using photocatalysis during synthesis. The reaction of the polymer with maleic acid molecules. Determination of the reaction mechanism and polymer structure.

Електрохiмiчна регенерація розчинів у виробництві оксидованих полiсахаридiв. Процес окислення йодат-іонів до перйодат-iонiв на платинових та дiоксидсвинцевих титанових анодах. Ефективність анодних матеріалів. Ітенсифiкуючий вплив домішків хлорид-iонiв.

Brief biographical information about the life of F. Haber - a German chemist and Nobel laureate. Investigation the reaction of nitrogen with hydrogen, which produces ammonia. The essence of Le Chatelier's Principle. The main function of the catalyst.

Dmitro Ivanovich Mendeleev - the great Russian scholar and lexicographer, chemist and physicist, engineer, geologist and even a meteorologist. Mikhail Lomonosov. Ukrainian chemist - Ivan Gorbachevski. Amedeo Avogadro. Ernest Rutherford. Robert Boyle.

The using nickel powders as electrode materials in multilayered ceramic capacitors. Development of technology of Ni/NiO nanopowders obtaining with particle size of 20 nm and minimal impurities content. The analyses of powder microstructure the products.

Plastic additives as a wide range of chemicals used by resin manufacturers, compounds and manufacturers to improve the properties, processing and characteristics of polymers. Features of their chemical composition and conditions of effective use.

The method of synthesis of fluorinated heterocycles. The use of mono- and 1,3-dicarbonyl substrates and their nitrogen-containing analogues. Biological activity, physical and chemical properties of heterocyclic compounds with perfluoroalkyl groups.

Study of influence of amino acids on the hydroxyapatite formation. Study of mineral obtained by transmission electron microscopy and powder X-ray diffraction. Analysis of the phase composition, crystal size and lattice microstrains of calcium phosphate.

Consideration of toxicity of the nanoparticles of the different elements. Investigation the effect of geometry (shape, size) of silver nanoparticles on their cytotoxicity. Shape, critical diameter, crystal lattice parameters of the nanoparticles.

Rapid determination of glucose concentration in technical and biological systems as an important scientific and technical task of modern chemistry. Review of the latest technical solutions in this area. Problems of developing first-generation biosensors.

Formation of the porous structure of zinc oxide. Morphological properties of anodized films. Methods of diffraction of X-rays and scanning electron microscopy. Analysis of electrochemical anodizing of zinc oxide in electrolyte based on glycerol.

Reductive opening of heterocycles as a source of functionalized organolithium compounds. Methods for homologation of heterocycles. Double lithiation of thianthrene. Phthalan: a versatile starting material. Homologation of six-membered heterocycles.

Greater moisture sensitivity as a key factor for the sensory use of SnO2 based ceramics. General characteristics of the properties of oxide ceramics. Consideration of humidity sensors based on semiconductor varistor ceramics SnO2-Co3O4-Nb2O5-Cr2O3.

Preparing cured hybrid epoxy-amine hydroxyurethane-grafted polymer by novel structure with lengthy epoxy-amine chains, pendulous hydroxyurethane units and a controlled number of cross-links. Using their increased flexibility for manufacturing of leather.

Методы анализа объектов окружающей среды, пищевых продуктов и сырья для их производства при помощи системы GO-xHT. Контроль содержания тяжелых металлов в различных биологических, фармацевтических пробах. Хроматографический анализ белков и пептидов.

Изучение подгруппы химических составляющих 3-й группы периодической таблицы Менделеева. Обзор распространения в природе твёрдых металлов подгруппы скандия. Анализ применения сплавов на основе алюминия. Обоснование использование элементарного бора.

Исследование гидролитической деградации биополимерных плёнок, полученных методом полива на подложку 2% и 3% растворов хитозана, в 1% уксусной кислоте. Анализ потери массы хитозановых плёнок в зависимости от рН среды и скорости химических реакций.

Study the process of liquid hydrocarbon oxidation. Chemical reaction of cyclohexane with the organic additives of different nature. Composition of products and speed of oxidation of toluene and p-xylene in the presence of binary liquid catalysts.

The study and characterization of sustainable impact polyacrlic acid (anionic polymer) by adsorption on the surface of fumed silica (SiO). Monitoring changes in the suspension stability using a Turbiscan LabExpert with TLAb cooler cooling module at 25oC.

Main calculation of activation volumes for interstitials and vacancie. Diffusion equations for point defects. Surface generation and recombination of point defects. Simulation of stacking fault growth. Simulation of stress-nediated dopant diffusion.

Modern and effective methods of hardening metals. Nitriding in a glow discharge in ammonia or in an anhydrous medium. Tribological and physicochemical properties of hardened surfaces obtained by nitriding with autonomous and interconnected BATR modes.

Influence of increasing the temperature of thermochemical activation of up to 750 °C and increasing the dosage of potassium hydroxide to 2.1 g/g of activated carbon synthesis of hydrolytic lignin on the formation of adsorption properties of the AC.

Development of technological scheme for processing of oil extracted in Iraq. Characteristics and physico-chemical properties of the oils of Iraq. A description of the stages of oil refining. Calculations of material balances of each processing stage.

Using the methods of flow cytometry and laser correlation spectroscopy study of the interaction of human erythrocytes with fumed oxides. Analysis of the results of determination of the scattering parameters and the degree of hemolysis of erythrocytes.

Consideration of oxygen as a basic element of atmosphere of Earth, his constituents, oxides, behavior of oxygen as a result of combustion, use of oxygen in a fuel, way of his receipt, production and uses of oxygen in different industries of industry.

Studies, the specificity of interphase interactions and features of the formation of nanoheterogeneous structure in polymer system. Determining the structure of interfacial region, the supramolecular structure and mechanical properties of the composites.

Concerning the separation, identification, and determination of the relative amounts of the components making up a sample. The relationship between analytical chemistry and the other sciences. Classification of modern analytical methods in chemistry.