Theoretical study of the basic functioning of the starch industry. The raw materials used for the а production of polysaccharide under consideration. The structure of the modified starches and dextrin. The use of the ingredient as a food additive.

Improving the method of dynamic analysis of mechanical systems dynamic factors dynamic model which can be represented by three-mass system of row with the first driving mass with prestressing elastic drive connections. Finding the dynamic coefficients.

Renewable energy is energy obtained from solar, wind, wave, geothermal energy, water and other renewable sources. At this time, processes that are constantly occurring in nature are used, and these resources cannot be exhausted as a result of human use.

Determining the effect of coating thickness on Hardness which is used on the protective layer when polyester coating is applied on the aluminum coil. Determining the scratch hardness using Hardness pencils test according to Wolff-Willborn "ASTM D3363".

Justification of the status of the time-projection camera as the main track detector and charged particle identification detector in the new multifunctional detector of the Collider-type heavy ion particle accelerator complex based on the Nuclotron.

The developing of a useful model dealing directly with biaxial loading of composite plates with stress concentrations, which can be called progressive damage model. Progressive damage model was utilized to analyze the damage evolution of specimen.

Model for calculation of nominal stresses in characteristic points of the surface fatigue crack to the tubular shaft in bending with rotation. Reasons for the decrease of the propagation velocity of cracks in the center and changing the geometry.

Application and classification of construction materials. Definition of key indicators affecting the choice of material. Alloys based on copper and aluminum. Properties, applications and benefits of innovative materials, thermosetting plastics, ceramics.

NbN and Nb-Si-N films were deposited by magnetron sputtering the Nb and Si targets on silicon wafers at various bias voltage. The films were annealed to establish their stability. The films were nanostructured represented an aggregation of crystallites.

Study the structure of the coating made of composite material that contains wear-resistant components SiC-Al2O3. The use of a metallic binder based on iron in composite production. The properties of the obtained coatings with the steel counterface.

Production polystyrene composite films with small content of fullerenes (up to 1 %) by casting o-xylene solutions. A dependence of the glass transition temperature of the composite material on its composition. The adsorption capacity of polymer material.

Adding ginger extract to the technology of table margarine production. Expanding the margarine market range and extending its shelf life. The effect of adding an additive on an organoleptic characteristics of margarine, giving it a spicy taste and aroma.

The study of the formation mechanism of flavonoid complex with aluminum ions. On the basis of the negative low Gibbs free energy values it found that chelation is a natural phenomenon. Determination of the antioxidant capacity of flavonoids stevia leaf.

Determination of the principles of formation of fashion innovations in society in the context of the functioning of the modern fashion system. Characteristics of fashion innovations as objects of the fashion system and means of fashion communication.

Development of flexible-wing Micro Air Vehicles at the University of Florida. Design intent and approach, identifying airplane components, fabrication techniques and various testing methods used to assess overall airplane and component performance.

Systematization of lean production tools that can be implemented at enterprises. Possibilities of using each of the proposed tools to solve problems of Ukrainian business development. Determination of prerequisites for the formation of corporate culture.

Development of a managed system architecture with the possibility of full-scale parametric optimization. Systematization of the architecture of the conversion system by the example of the technological process of liquid heating. Software designer EFFLI.

Technocracy is the form of government, which attempts to distance itself from political representation or affiliation with a particular ideology. Technocrats derive their legitimacy from their skills and expertise, and focus primarily on problem-solving.

Obtaining prototypes of hemp oil by cold pressing. Determination of mass fraction of moisture оil content measurement. Indicators of seeds' quality during long storage. Yield and quality indicators of by-products obtained in the production of hemp oil.

Investigation of obtaining diesteriv aliphatic dicarboxylic acid in the presence of aprotic catalysts - Lewis acids. Influence of catalysts on the technological indicators esterification process. Esterification process in the presence of aprotic acids.

The aim of the article is to consider issues related to the technological process of preserving and enriching the composition of milk. It is noted that milk, which is of great importance in nutrition due to the presence of proteins, fats, minerals.

This work is devoted to the decision of scientific and technical problems of the day, namely to the development of scientific and methodological bases of forming of structural and phase composition of alloys synthesized by the combined processes

New approaches to research and construction microbial producers of antibiotics. Nutrient mediums for biosynthesis. Oil refining, purification and quality control. Screening of libraries of synthetic compounds. Culturing producer strains broad spectrum.

Trends in the development of international legal regulation of technology transfer. Challenges related to overcoming the fragmentation of international legal regulation in this area. Components of technology transfer, legal principles of their regulation.

Offered and analysed of the method of calculating the operating parameters of warping spools and mode of winding. A formula that is obtained allows to define relationship between the parameters of the threads wound on a warping spool and their pull.

The importance of packaging in the production and sale of cheese. Ways to extend the shelf life without loss of useful properties of the product. History and vacuum packaging function. Nanocomposites in modern packaging. Utilization of the container.

The model is based on a regional convolutional neural network architecture that can identify and classify different types of damage, including those caused by natural disasters, accidents, or deliberate warfare attacks, such as shelling and bombardment.

The model is based on a regional convolutional neural network architecture that can identify and classify different types of damage, including those caused by natural disasters, accidents, or deliberate warfare attacks, such as shelling and bombardment.

Use of fluid with magnetorheological effect in crane’s system can reduce significantly unwanted overload, vibrations and resonances arising from them. Applying periodically changing strengths of an external synchronized with cycles of periodical crane's.

The model of the disperse material behavior under vibration in the hole of the dispenser based on the Navier-Stokes equations. The influence of the power factor on the movement of the product and the parameters of the hole on the vibrating dosing process.